Dr. Masoud Rahimi


Professor
Department of Chemical Engineering
Faculty Engineering
Razi University


Address: Department of Chemical Engineering,Razi University, Tagh Bostan, Kermanshah, Iran

Tel:+98(831)4274530
Fax:+98(831)4274542

Emails: (=@)

m.rahimi razi.ac.ir

masoudrahimi yahoo.com


كتاب 1

EDUCATION : CHEMICAL ENGINEERING

  • Ph.D: Chem. Eng. Dept. , UMIST , Manchester , UK , July 2000 Thesis : Visual 3-D modelling of mixing in stirred tank reactors Supervisor : Professor R. Mann

  • M.Sc: Tarbiat Modarres University, Tehran, Iran, May 1993 Thesis : Thermal analysis of combustion reaction in solid phase Supervisor : Dr A.Z. Moghaddam

  • B.Sc: Abadan Institute of Technology, Ahwaz, Iran, February 1988 Thesis: Optimisation of distillation tower in Kermanshah refinery Supervisor : Dr M. Esazadeh



WORKING EXPERIENCE

  • Academic staff , Chem. Eng . Dept, Razi University, Kermanshah , Iran, 1993- now.

  • Head of “ CFD application in Chemical Engineering “ Research Center, 2004.

  • Vice Chancellor of Research Department, Razi University, Kermanshah , Iran, 2003-04.

  • Vice Chancellor of Education & Research Department, Faculty of Engineering, Razi University, Kermanshah , Iran, 2002-2003.

  • Head of chemical Engineering Department, Razi University, Kermanshah , Iran, 1995-1997 and 2001-2002.

  • Process Engineer , Oil Ind. Eng. and Const. Co(private), Tehran, Iran, 1990-1992.



RESEARCH EXPERIENCE

  • Process tomography applications in chemical Engineering

  • Modelling of process involve with combustion.

  • Modelling of process involve with heat transfer.

  • Modelling of heat transfer enhancement in pipes.

  • Modelling of fluid mixing behaviour in stirred vessel.

  • Modelling of separation by membranes.

  • Modelling of falling film evaporators.

  • Thermal analysis of solid-solid reaction by TG & DSC.



COMPUTER EXPERIENCE

  • Language:

    • FORTRAN

    • Basic

    • C++

  • Software:

    • AVS

    • Stanford graphics

    • Uniras

    • Excel

    • Powerpiont

    • CFD(Fluent &Flow3D)

    • 3D studio

    • CAD

    • Tecplot,….

TEACHING EXPERIENCE

  • Lecture

    • Heat transfer

    • Advance fluid mechanics

    • Process engineering fundamentals

    • Kinetic and reactor design

    • Computer Programming and simulation

    • Material and energy balance

    • Reactors

  • Laboratory

    • Heat Transfer

    • Unit operation

    • Industrial chemistry



AWARDS

  • Distinguished 1% world Researchers(بين 1% برتر دانشمندان و نخبگان علمي جهان)

  • Distinguished Professor for Year 2011 in Iranian University(استاد نمونه كشوري)
  • Distinguished Researcher for Year 2003 in Razi University

  • Distinguished Researcher for Year 2004 in Razi University

  • Distinguished Researcher for Year 2005 in Razi University

  • Distinguished Researcher for Year 2006 in Razi University

  • Distinguished Researcher for Year 2007 in Razi University

  • Distinguished Researcher for Year 2008 in Razi University

  • Distinguished Researcher for Year 2009 in Razi University

  • Distinguished Researcher for Year 2009 in Kermanshah Province.

  • Distinguished Researcher for Year 2010 in Razi University

  • Distinguished Researcher for Year 2011 in Razi University

  • Distinguished Researcher for Year 2012 in Razi University

  • Distinguished Researcher for Year 2013 in Razi University

  • Distinguished Researcher for Year 2014 in Razi University

  • Distinguished Researcher for Year 2015 in Razi University



SCIENTIFIC POSITIONS

  • Member of Iranian Society of Chemical Engineering.

  • Member of Razi University Council.

  • Member of Research Council of Razi University.

  • Member of Engineering Division of Promotion Council of Western Iran Universities.

  • Member of Promotion Council of Faculty of Engineering of Razi University.

  • Member of Postgraduate Committee of Razi University.

  • Member of Statistic, research and technology council of Kermanshah province.

  • Head of scientific council of Kermanshah province.

  • Referee of Iranian Journal of Chemistry and Chemical Engineering.

  • Referee of Iranian Journal of Chemical Engineering.

  • Referee of journal of membrane science


POSRGRADUATE STUDENTS

    1-PhD students

  • -Asghar Alizadeh: CFD modelling in gas/liquid contact system( graduated Sep. 2009).

  • -Kayomars Abbasi Khazaei, Numerical modelling of HiTAC mode of combustion in industrial boilers( graduated Sep. 2009).

  • -Arsalan Parvareh: CFD modelling in the chemical reaction process.

  • -Abbas Khoshal: CFD modelling of HiTAC technique

  • -Reza Shabanian: CFD modelling of using HiTAC in syn-gas reactions

  • -Fahemeh Parvizian: CFD modelling of high frequency ultrasound waves in mixing.

  • -Mahdieh Abolhassani: CFD modelling of high frequency ultrasound waves in heat transfer.



SCIENTIFIC REPORTS:

  • Recovery of Lanolin from wool grease in wool washing company, Kermanshah industrial organization, Iran,1995.

  • Design and manufacturing of experimental stirred tank reactor, Razi university, Iran,1995.

  • Modelling of mixing in poly styrene polymerisation reactor, Chilworth technology, England, 1998-2000.

  • Modelling of mixing in stirred tank reactor using CFD, Razi university, Iran,2002.

  • Modelling of mixing in Kermanshah crude oil storage tank, collaborative research with Kermanshah refinery, Iran,2003.

  • Modelling of super heater pipe of Bisotoun power plant boiler in order to find the reason of pipe explosion, collaborative research with Iranian West region electricity company . Iran 2005.

  • CFD modelling of jet mixing in crude oil storage tank, collaborative research with Kermanshah refinery 2005.

  • CFD modelling of falling film evaporator in sugar industries, Razi University,2006.

  • CFD modelling of Natural gas transfer line of Kermanshah province collaborative research with Kermanshah gas company, 2008.

  • CFD modelling of reactive jet mixing in final correction pit collaborative research with Iranian West region electricity company, 2008.



BOOK

  • Process design by Aspen Plus , Razi University publication, Kermanshah, Iran, 2005.

  • CFD modelling of Mixing in Process Industries, Razi University publication, Kermanshah, Iran, 2008.

  • CFD application in Chemical Engineering, Razi University publication, Kermanshah, Iran, 2009.



PUBLICATION & PRESENTATION

1- Moghaddam, A.Z. , Rahimi, M., ²Kinetic studies on thermal decomposition of Kmno4 by DSC & TG² , Inter. Journal of Eng. , vol 5, no 1a, 7, 1994, printed in Iran


2- Rahimi, M., Senior, P.R. and Mann, R., ²Image-reconstruction 3-D visual modelling of stirred vessel mixing for an inclined-blade impeller², I.Chem.E. Symp.Series., 146, 135, 1999.


3- Rahimi, M., Senior, P.R. and Mann, R., ²Visual 3-D modelling of stirred vessel mixing for an inclined-blade impeller², Trans.I.Chem.E., 78, 348, 2000


4- Rahimi, M. and Mann, R., ²Interpretation of Macro- and Micro-mixing measured by dual-wavelength photometric tomography², Proc.10th Europ.Conf. on Mixing, ,377, Delft, 2000


5- Rahimi, M. and Mann, R.,² Macro-mixing, partial segregation and 3-D selectivity fields for a semi-batch stirred reactor², Chem. Eng. Sci, 56, 763,2001 .


6- Rahimi, M. ,"Partial segregation and its effect on product yield", Proceeding of the Sixth national congress of Iranian chemical engineer, Isfahan,Iran,2001.


7- Rahimi, M. and Alizadeh, A.A., "The role of impeller rotation direction on mixing behaviour", Proceeding of the Seventh national congress of Iranian chemical engineer, Tehran, Iran, 2002 .


8- Rahimi, M. and Alizadeh, A.A.," The study of mixing in Kermanshah refinery crude oil storage tank", Proceeding of the Eighth national congress of Iranian chemical engineer, Mashhad, Iran, 2003.


9- Rahimi, M. and Abassi,K.,"Three dimensional CFD modelling of permeate flux from micro-filtration membrane", Proceeding of the Eighth national congress of Iranian chemical engineer, Mashhad, Iran, 2003 .


10- Alizadeh, A.A , Rahimi, M., "CFD Simulation of Mixing in a Large Scale Crude Oil Storage Tank Equipped with Multiple Side Entry Impellers", Proceeding of FTEC2003 conference , Bali, Indonesia,2003.



2004…………………………

11- Rahimi, M., and Parvareh, A., The effect of turbulence models on the predicted mixing time by a jet mixer", The XXV CILAMCE Iberian Latin American Congress on Computational Methods, Recife,Brazil, 2004.


12-Rahimi, M., Madaeni, S.S and Hashemi, F., Optimization of New Natural Gas Sweetening Plant, The Ninth Congress of Iranian Chemical Engineering, Tehran, Iran, 2004.


13- Rahimi, M., Madaeni, S.S and Hashemi, F., Effect of Split Flow Scheme on Performance of New Amine Gas Sweetening Unit, The Ninth Congress of Iranian Chemical Engineering, Tehran, Iran, 2004.


14- Abassi, K., Rahimi, M., Madaeni, S.S, Study of the barrier effect on turbulence and shear stress upon membrane surface using CFD, The Ninth Congress of Iranian Chemical Engineering, Tehran, Iran, 2004.


15- Madaeni, S.S, Rahimi, M., and Hashemi, F., Amine dual system- The use of membrane for performance increasing in Gas Sweetening Unit, The second congress of oil technology promotions, Teheran , Iran, 2004.


16- Alizadeh, A.A , Rahimi, M.,"CFD Simulation of Homogenization in Large Scale Crude Oil Storage Tanks, Journal of Petroleum Science and Engineering, 43,151-161, 2004



2005……………..

17- Rahimi, M., "The effect of impellers' layout on mixing time in a large scale crude oil storage tank" Journal of Petroleum Science and Engineering, 46 161- 170, 2005


18- Rahimi, M., Madaeni, S.S, Abassi, K, "CFD modeling of permeate flux in cross flow microfiltration membrane", Journal of membrane science, 255,23-31,2005.


19- Rahimi, M., Seyed Mehdi Shariati , Abbas Khoshhal, "CFD study of using a tube insert and an air blowing system to prevent tube failure in the Bisotoun Power Plant boiler", 413-418, WSEAS Conference on SMO, Corfu, Greece, 17-19 August, 2005.


20- Rahimi, M.,Seyed Mehdi Shariati, Abbas Khoshhal "CFD modeling of an air blower operation to prevent boiler's tube explosion", WSEAS Transaction on Computer, 4,1025-1032, 2005.


21- Rahimi, M., Arsalan Parvareh., "Experimental and CFD investigation on mixing by a jet in a semi-industrial stirred tank"., Chemical Engineering Journal, 115, 85-92, 2005.


22- Rahimi, M., Seyed Mehdi Shariati, Abbas Khoshhal "CFD modeling of combustion and transfer phenomenon in the Bisotoun power plant boiler", Proceeding of the 10th National Congress of Iranian Chemical Engineer , Sistan,2005.


23- Rahimi, M., Arsalan Parvareh,"CFD study on the effect of the angle between the jet and nozzle on the mixing time", Proceeding of the 10th National Congress of Iranian Chemical Engineer , Sistan,2005.


24- Rahimi, M., Seyed Vahid Hosseini,"CFD study on the impeller power consumption on the mixing time in stirred tanks", Proceeding of the 10th National Congress of Iranian Chemical Engineer , Sistan,2005.


25- Shahram Amiri, Hamed Rashidi, Rahimi, M.,, "CFD modeling of falling film evaporator", Proceeding of the 10th National Congress of Iranian Chemical Engineer , Sistan,2005.


26- Rahimi, M., Abbas Khoshhal, Seyed Mehdi Shariati, "CFD study on Platen super heater tube failure in the Bisotoun Power Plant boiler", Proceeding of 20th international power system conference, Tehran, 2005.



2006…………………

27- Rahimi, M.,Abbas Khoshhal, Seyed Mehdi Shariati, "CFD modeling of a boiler’s tubes rupture", Applied thermal Engineering, 26, 2192-2200, 2006.


28- Rahimi, M., Hosseni, S.V., "CFD investigation on the effect of the blades layout of a marine impeller on mixing in a stirred tank", The 11th National Congress of Iranian Chemical Engineer, Tehran, 2006.


29- Rahimi, M., Roozbahani M., Madaeni, S.S., "CFD and Experimental study on the effect of an impeller rotation on the permeate flux from a membrane", The 11th National Congress of Iranian Chemical Engineer, Tehran, 2006.


30- Rahimi, M., Mohseni, M.,"CFD modeling of a water absorber packed bed", The 11th National Congress of Iranian Chemical Engineer, Tehran, 2006.


31- Rahimi, M., Shabanian, S.R.,"CFD and Experimental comparison of the performance of the twisted tape tube insert in two types of heat exchanger", The 11th National Congress of Iranian Chemical Engineer, Tehran, 2006.


32- Shabanian, S.R., Etmenan, A., Rahimi, M.,"CFD and Experimental comparison on heat transfer rate performance in an air cooler using two types of tube insert", The 11th National Congress of Iranian Chemical Engineer, Tehran, 2006.


33- Alizadeh, A.A , Rahimi, M.," Three Dimensional visual modeling of a valve tray column", The 11th National congress of Iranian chemical Engineer, Tehran, 2006.



2007……………………..

34- Rahimi, M.,and Parvareh, A., CFD study on mixing by coupled jet-impeller mixers in a large crude oil storage tank", Computer and Chemical Engineering, 31,737-744, 2007.


35- Ahanj, M. D. and Rahimi, M." CFD modeling of a radiant heater",The Fifth Mediterranean combustion symposium ,Monastir, Tunisia, September 9-13 2007.


36- Parvareh,A., Rahimi, M. and Yarmohammadi,M." CFD study of the effect of the jet position on neutralization process in final correction pit of the Bistoun power plant"22 nd Int. Power system conference, 9-12 November,Tehran, Iran.



2008………………………

37- Yarmohammadi M., Parvareh A., and Rahimi, M." Experimental and CFD studies on the effect of the jet’s position on mixing", 5th international congress of Iranian Chemical Engineers, Kish, 2-5 January, 2008.


38- Mirshahi, H.and Rahimi, M." The effect of the heat loads on the partial-vacuum thermosyphon performance", 5th international congress of Iranian Chemical Engineers, Kish, 2-5 January, 2008.


39- Mohammadi N., Parvareh, A., Rahimi, M. and Satari M." Study of the mixing progress in stirred vessel using ERT", 5th international congress of Iranian Chemical Engineers, Kish, 2-5 January, 2008.


40- Ahanj M.D., Rahimi, M. and Khoshhal A." CFD modeling of heat transfer from a radiant heater", 5th international congress of Iranian Chemical Engineers, Kish, 2-5 January, 2008.


41- Sanjari J., Alizadehdakhel A. and Rahimi, M." CFD investigation of vertical two-phase flow regimes", 5th international congress of Iranian Chemical Engineers, Kish, 2-5 January, 2008.


42- Abolhasani , M., Rahimi, M. Madaeni S. S. "CFD and experimental study on microfiltration fouling in different operating pressure, The first National Conference on CFD Application in Chemical Engineering, 14-15 May 2008, Kermanshah, Iran.


43- Rahimi, M.and Shabanian,S.R. "CFD and experimental studies on the performance of the modified twisted tape tube inserts" The first National Conference on CFD Application in Chemical Engineering, 14-15 May 2008, Kermanshah, Iran.


44- Abbasi Khazaei1 , K. Hamidi A.A., Rahimi, M."CFD modeling of the highly preheated and diluted air combustion furnaces" The first National Conference on CFD Application in Chemical Engineering, 14-15 May 2008, Kermanshah, Iran.


45- Parvareh, A., Alizadehdakhel, A., Mohammadi, N., Sanjari, J., Rahimi, M.," CFD and ERT investigations on two-phase flow regimes in a horizontal pipe" The first National Conference on CFD Application in Chemical Engineering 2008, 14-15 May, Kermanshah, Iran.


46- A. Alizadehdakhel, H. Mirshahi, S. A. Shahrokhi and M.Rahimi "Artificial Neural Network modeling of the efficiency and temperature profile in a thermosyphon., Energy, Fuel & Environment Conf., , 25-27 May 2008, Tehran, Iran


47- M.Rahimi and H. Mirshahi "The effect of fill ratio on performance and heat transfer coefficient of thermosyphon's evaporator and condenser" Energy, Fuel & Environment Conf., , 25-27 May2008, Tehran, Iran.


48- M. Rahimi, M. D. Ahanj CFD Modeling and modification of Radiant Heater", Energy, Fuel & Environment Conf., , 25-27 May 2008, Tehran, Iran.


49- M.Rahimi, S. A. Shahrokhi and A. Alizadehdakhel, "CFD simulation of condensation and evaporation in a thermosyphon", Energy, Fuel & Environment Conf., , 25-27 May2008, Tehran, Iran.


50- Rahimi, M., Mohseni, M.,"CFD modeling of the effect of absorbent size on absorption performance of a packed bed column", Korean journal of Chemical Eng., 25, 3, 395, 2008


51- Rahimi, M., Shabanian, S.R., Alsairafi A.A. "CFD and experimental studies on the performance of the modified twisted tape tube inserts", Chemical Engineering and Processing, 48, 762-770, 2008.


52- Asgary, K. , Rahimi, M. and Jesri, S. " The effect of surface on boiling and condensation and increasing of performance of closed two phase thermosyphone", 12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


53- Sepehri, S., Rahimi, M., Madaeni, S.S., "CFD and experimental studies on the effect of dynamics pressure on membrane permeate flux",12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


54- Parvareh, A., Alizadehdakhel A. Rahimi, M., A CFD and electrical resistance tomography study on liquid hold up on gas liquid two phase flow, 12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


55- Kakeh khani, A., Rahimi, M. " CFD and experimental studies on solid/ liquid mixing in high viscosity flow " 12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


56- Rashidi, V. , Rahimi, M. " The effect of The electrode distance on the electrical resistance tomography results", 12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


57- Abolhasani, M., Madaeni S. S., Rahimi, M., "A survey on the microfiltration membrane fouling at different cross flow velocity"12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


58- Abolhasani, M., Rahimi, M., Madaeni S. S.,"A survey on the microfiltration membrane fouling at different different operational pressure"12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


59- Alizadehdakhel A., Sanjari, J., Rahimi, M., "An experimental study on flow regime and pressure drops in a vertical tube"12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.


60- Shabanian, S.S, Rahimi, M. ,Zahedi, G. " A study on heat transfer enhancement by a tube insert using Artificial Neural network modelling", 12th National congress of Iranian chemical Engineer, Oct 2008,Tabriz, Iran.



2009………………….

61- Alizadehdakhel A., Rahimi M. , Alsairafi A.A. "Numerical and experimental investigation on a new modified valve employed in a valve tray column", Korean J. of Chemical Engineering, 26, 475-284, 2009.



62- Khoshhal A., Rahimi M. , Alsairafi A.A "CFD investigation on the effect of air temperature on air blowing cooling system for preventing tube rupture", International communications in heat and mass transfer., 36 ,750-756,2009.


63- Alizadehdakhel A., Rahimi M. , Sanjari, J., Alsairafi A.A., " CFD and artificial neural network modeling of two-phase flow pressure drop, International communications in heat and mass transfer, 36 , 850–856,2009.


64- Abbasi Khazaei K.,.Hamidi A.A, Rahimi M. , Numerical modeling and simulation of Highly preheated and diluted air combustion Furnaces, International journal of Engineering, 22,107-118, 2009.


65- Parvareh A., Rahimi M. , Yarmohammadi M., Alsairafi A.A, Experimental and CFD studies on the effect of the jet position on mixing performance, Iranian journal of Chemical Engineering, 6, 3-12, 2009.


66- M.Rahimi, Madaeni S. S., Abolhasani, M., Alsairafi A.A.,"CFD and Experimental Studies on a Membrane Microfiltration Fouling" Chemical Engineering and Processing, 48, 1405-1413, 2009.


67- Abbasi Khazaei K.,.Hamidi A.A, Rahimi M. , Numerical investigation of fuel dilution effects on the performance of the conventional and the highly preheated and diluted air/exhaust gas combustion furnaces, Chinese journal of Chemical Engineering, 17, 711-726, 20009.


68- Parvareh A., Yarmohammadi M., Rahimi M. , Alsairafi A.A, Experimental and CFD study on the effect of jet position on reactant dispersion performance, International communications in heat and mass transfer, 36 , 1096–1102, 2009.


69- Ghahramani, A., Khoshhal A.,Rahimi M. , Dokohaki, H., CFD study on the possibility of increasing the performance of recovery boiler of the Fajr petrochemical company using HiTAC technique, Second national conference on CFD applications in chemical industries, May 2009, Tehran, Iran.


70- Kakehkhani A., Rahimi M. , A study on the effect of helical ribbon impeller clearance on mixing performance, Second national conference on CFD applications in chemical industries, May 2009, Tehran, Iran.


71- M.Rahimi, Aghel B., Power generation enhancement of a PEM fuel cell using modified cathode side gas channel, EC2009 Kuwait conference, November, 2009.


72- Amraei S., Rahimi M. , A comparison between the mixing characteristics of Visco-jet and Rushton turbine impellers, 6th international congress of Iranian Chemical Engineers, Kish, 16-20 November, 2009.


73- Shabanian S. R., Khoshhal A., Rahimi M. , CFD investigation on premixed micro-combustion of hydrogen–air mixture: effects of chamber size, wall heat conductivity and fuel/air flow rate, 6th international congress of Iranian Chemical Engineers, Kish, 16-20 November, 2009.


74- Hatami T., Rahimi M. , Mathematical modeling of supercritical fluid extraction of acorn oil, 6th international congress of Iranian Chemical Engineers, Kish, 16-20 November, 2009.


75- Hatami T., Rahimi M. , Vetiver oil extraction Optimization using supercritical fluid6th international congress of Iranian Chemical Engineers, Kish, 16-20 November, 2009.


76- Shahoseini M., Rahimi M. , A study on heat transfer and flow friction in a tube equipped with jagged twisted tape insert with 900 rotation, 6th international congress of Iranian Chemical Engineers, Kish, 16-20 November, 2009.


2010……………………………….

77- Alizadehdakhel A. Rahimi M. , Alsairafi A.A. " CFD and experimental study on the effect of the valve’s weight on the performance of a valve tray column, Computer and Chemical Engineering journal, 34, 1–8, 2010. (Hot paper)


78- Madaeni S. S., Rahimi, M., Abolhasani M., Investigation of cake deposition on various parts of the surface of microfiltration membrane due to fouling, Korean journal of Chemical Engineering, 27, 206-213 ,2010.


79- Alizadehdakhel A., Rahimi M. , Alsairafi A.A., CFD modelling of flow and heat transfer in a thermosyphon, International communications in heat and mass transfer,37, 312-318, 2010. (Hot paper)


80- Mirshahi H., Rahimi M. , Experimental study on the effect of the heat loads, fill ratio and extra volume on performance of a partial-vacuumed thermosyphon, Iranian journal of Chemical Engineering,6, 15-27, 2010.


81- Parvareh A., Rahimi M. , Alizadehdakhel A., Alsairafi A.A.,CFD and ERT investigations on two-phase flow regimes in vertical and horizontal tubes, International communications in heat and mass transfer, 37, 304-311, 2010. (Hot paper)


82- Rahimi M. , Asgari K., Jesri S., Thermal characteristics of a resurfaced condenser and evaporator closed two-phase thermosyphon, International communications in heat and mass transfer, 37, 703–710, 2010.


83- Rahimi M. , Aghel B., Alsairafi A.A., Experimental and CFD investigation on power generation enhancement in a PEM fuel cell using a coil wire insert, Chemical Engineering and Processing journal , 49, 689-696, 2010.


84- Heidaryan E., Moghadasi J., Rahimi M. New Correlations to Predict Natural Gas Viscosity and Compressibility Factor, Petroleum science and engineering, 73,67-72, 2010.


85- Rahimi M. , Kakehkhani A., Alsairafi A.A., Experimental and CFD Studies on Mixing Characteristics of a Modified Helical Ribbon Impeller, Korean journal of chemical Engineering, 27, 1150-1158, 2010.


86- Khoshhal A., Rahimi M. , Alsairafi A.A., CFD modeling of NOx emission, HiTAC and heat transfer in an industrial boiler, Numerical heat transfer journal,58, 295-312, 2010.


87- Abbasi Khazaei K.,.Hamidi A.A, Rahimi M. , CFD modeling study of High Temperature and low oxygen content exhaust gases combustion furnaces, Iranian journal of Chemistry and Chemical Engineering, 29, 86-104, 2010.


88- Hatami T., Rahimi M. , Vetiver oil extraction optimization using supercritical carbon dioxide fluid, Iranian journal of Chemical Engineering, 7, 64-70, 2010.


89- Khoshhal A., Rahimi M. , Shabanian S.R., Alsairafi A.A., CFD modeling of reduction in NOX emission using HiTAC technique, International Conference on Environmental Science and Technology, ICEST, Penang, Malysia, 2010.


90- Parvareh A., Alizadehdakhel A., Rahimi M. , Alsairafi A.A., Study of two-phase flow regimes in vertical tubes using CFD and tomography, Proceedings of International Conference on Chemical Engineering and Applications,CCEA, Singapore,2010.


91- Rahimi, M., CFD applications in heat exchange equipments, Second national Conf. on Energy, Fuel & Environment, Kermanshah, Iran, 2010


92- Pourjafari, N., Rahimi, M. CFD study and GA optimization of energy consumption of a mixing by a Rushton impeller, Second national Conf. on Energy, Fuel & Environment, Kermanshah, Iran, 2010.


93- Shabanian S.R, Rahimi M. , Amiri A., Sharifnia Sh., CFD modeling of methane reforming to synthetic gas in a plug flow reactor, Second national Conf. on Energy, Fuel & Environment, Kermanshah, Iran, 2010.


94- Amiri A., Rahimi M. , Shabanian S.R., Using the HiTAC technique in partial oxidation combustion of methane, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.


95- Asadpoor M. , Rahimi M. , Omidkhah M.R., Computational Fluid Dynamics modeling of hydrate formation in natural gas pipelines, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.


96- Parvareh A., Rahimi M. , Alizadehdakhel A., CFD and tomography study of mixing and reaction, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.


97- Faryadi M., Parvizian F., Rahimi M. ,CFD modeling of Ultrasound wave propagation in a liquid phase medium, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.


98- Pourjafari N., Rahimi M. , CFD modeling and Genetic algorithm study for an impeller power consumption prediction, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.


99- S. R. Shabanian, M. Rahimi , Sh. Sharifnia, A. Amiri, CFD modeling of catalytic partial oxidation of methane to syngas in a fixed-bed reactor, Thirteen Congress of Iranian chemical Engineers, Kermanshah, 3-6 November, Iran.



2011……………………………….

100- Hatami T., Rahimi M. , Veggi, P.C., M. A. A. Meireles, Mathematical Modeling of near-critical carbon dioxide extraction of khoa (Satureja boliviana Benth Briq) using ethanol as a co-solvent, Journal of Supercritical fluids, 55, 929–936, 2011.


101- Shabanian S.R, Rahimi M. , M. Shahhosseini, A. A. Alsairafi , CFD and experimental studies on heat transfer enhancement in an air cooler equipped with different tube inserts, International communications in heat and mass transfer, 38, 383–390, 2011.


102- Heidaryan E., Hatami T., Rahimi M. , J. Moghadasi, Viscosity of Carbon Dioxide at Supercritical Region, Measurement and Correlation Approach, Journal of Supercritical fluids, 56, 144–151, 2011.


103- Hatami T., Rahimi M. , J. Vera, On the Compatibility between Vapor Pressure Data and the Critical Constants: Use of the van der Waals Family of Cubic Equations of State to study the cases of 2-Methoxyethanol and 2-Ethoxyethanol, Fluid Phase Equilibria, 303,201-204, 2011.


104- Khoshhal A., Rahimi M. , Alsairafi A.A., Diluted Air Combustion and NOx Emission in a HiTAC Furnace, Numerical heat transfer journal, 59, 633–651, 2011.


105- Parvareh A., Rahimi M. , Madaeni S.S., Alsairafi A.A., Experimental and CFD study on the role of fluid flow pattern on membrane permeate flux, Chinese journal of Chemical Engineering, 19, 18-25 ,2011.


106- Khoshhal A., Rahimi M. , Ghahramani A., Alsairafi A.A., CFD Modeling of High Temperature Air Combustion Technique in a Heat Recovery Steam Generator Boiler, Korean journal of chemical Engineering, 28, 1181-1187, 2011.


107- Rahimi M. , Amraei S., Alsairafi A.A., Experimental and CFD modeling of mixing by Visco-jet impellers, Korean journal of chemical Engineering, 28, 1372-1379 ,2011.


108- Shabanian S.R, Rahimi M. , A. A. Alsairafi , CFD study on hydrogen–air premixed combustion in a micro scale chamber, Journal of Chemistry and Chemical Engineering, 29, 155-165, 2011.


109- Parvizian F., Rahimi M. , Faryadi M., Macro- and micromixing in a novel sonochemical reactor using high frequency ultrasound, Chemical Engineering and Processing journal, 50, 732– 740, 2011.


110- Khoshhal A., Rahimi M , Alsairafi A.A., CFD study on influence of fuel temperature on NOx emission in a HiTAC furnace, International communications in heat and mass transfer, 38, 1421–1427 2011.


111- Rahimi M. , Mirshahi H., The effect of fill ratio on performance and heat transfer coefficient of thermosyphon's evaporator and condenser, Journal of Engineering material, 1, 41-51, 2010.


112- Parvizian F., Faryadi M.,.Rahimi M. , CFD modeling of fluid flow pattern in a high-frequency sonoreactor , 3th National conference on CFD applications in chemical industries, May 2011, Tehran, Iran.


113- Khoshhal A., Rahimi M , CFD and experimental studies on NOx emission and high temperature air combustion in a furnace equipped with a HiTAC system, 3th National conference on CFD applications in chemical industries, May 2011, Tehran, Iran.


114- Shabanian S.R., Derudi M., Rahimi M. , Frassoldati A., Cuoci A. , Faravelli T., Experimental and numerical analysis of syngas mild combustion, XXXIV meeting of Italian section of the combustion institute, 24-26 October, 2011.


115- Abolhasani M., Dehbani M., Rahimi M. , Experimental and CFD studies on heat transfer enhancement using high frequency ultrasound waves, 7th international congress of Iranian chemical Engineers, Kish, 21-24 November, 2011.


116- Parvizian F., Faryadi M.,.Rahimi M. , Prevention and Removal of Gas Hydrates in Pipelines Using Ultrasonic Waves, 7th international congress of Iranian chemical Engineers, Kish, 21-24 November, 2011.


117- Pirhoushiaran, T., Rahimi M. , The effect of vibration on PEM fuel cell performance, 7th international congress of Iranian chemical Engineers, Kish, 21-24 November, 2011.


118- Azari, A. Kalbasi, M., Rahimi M. , A CFD study on the convective heat transfer of Al2O3/Water nanofluids under laminar flow regime. 7th international congress of Iranian chemical Engineers, Kish, 21-24 November, 2011.


119- Azari, A. Kalbasi, M., Rahimi M. , Nanofluids Heat Conduction Modeling Based on Nanolayer Thickness, 7th international congress of Iranian chemical Engineers, Kish, 21-24 November, 2011.


2012…………  
 

120- Parvizian F.,   Rahimi M., Hosseni, S.M., Madaeni, S.S., Alsairafi A.A., The affect of high frequency ultrasound waves on ion exchange membrane electrochemical properties at different electrolytic concentration, Desalination, 286,155–165, 2012. 
 
121- Ahanj M.D., Rahimi M., Alsairafi A. A., CFD modeling of a radiant tube heater, International communications in heat and mass transfer, 39, 432–438, 2012.

122- Hatami T.,
Rahimi M., Daraei H., Heidaryan E., Alsairafi A.A., PRSV equation of state parameter modeling through artificial neural network and adaptive network-based fuzzy inference System, Korean journal of chemical Engineering, 29,657-667, 2012. 
 
123-   Parvizian F., 
Rahimi M., Faryadi M., A comparison between mixing in a novel high frequency sonoreactor and a stirred tank reactor, Engineering Applications of Computational Fluid Dynamics, 6, 295–306 , 2012. 

 124- Parvizian F., 
Rahimi M., Azimi, N., Macro- and micromixing studies on a high frequency continuous tubular sonoreactor, Chemical Engineering and Processing journal, 57– 58, 8– 15, 2012. 

 125-
Rahimi, M., Dehbani M., Abolhasani M., Experimental study on the effects of acoustic streaming of high frequency ultrasonic waves on convective heat transfer: effects of transducer position and waves interference, International communications in heat and mass transfer, 39, 720–725, 2012.

126- Beigzadeh R.,
Rahimi, M., Prediction of heat transfer and flow characteristics in helically coiled tubes using artificial neural networks, International communications in heat and mass transfer, 1279-1285, 2012.

127- Beigzadeh R.,
Rahimi, M., Shabanian S.R., Developing a feed forward neural network multilayer model for prediction of binary diffusion coefficient in liquids, Fluid Phase Equilibria, 331, 48–57, 2012.

128- Karami A., Rezaei E.,
Rahimi M. and Zanjani M., Artificial Neural Modeling of the Heat Transfer in an Air Cooled Heat Exchanger Equipped with Butterfly Inserts, International Energy Journal 13 21-28 ,2012.

129- Beigzadeh R.,
Rahimi, M., Prediction of thermal and fluid flow characteristics in helically coiled tubes using ANFIS and GA based correlations, International communications in heat and mass transfer, 39, 1647-1653,2012.

130- Shabanian S.R.,
Rahimi M., Amiri A., Sharifnia S., Alsairafi A.A., CFD modeling of hydrogen production in an autothermal reactor: effect of different thermal conditions, Korean journal of chemical Engineering, 29,1531-1540, 2012.

131-
Rahimi, M., Abolhasani M., Dehbani M., Alsairafi A.A., CFD modeling of heat transfer by high frequency ultrasound waves,   Numerical heat transfer-Part A, 62, 822-841, 2012.  

132-Beigzadeh R., Rahimi, M., Prediction of thermal and fluid flow characteristics in helically coiled tubes using ANFIS and GA based correlations, International communications in heat and mass transfer, 39, 1647-1653, 2012.
133- Abolhasani M., Rahimi M., Dehbani M., Shabanian S.R., CFD Modeling of Low, Medium and High Frequency Ultrasound Waves Propagation Inside a Liquid Medium, 4th National conference on CFD applications in chemical industries, May 2012, Tehran, Iran.
134-Beigzadeh R., Dadfar M., Aghel B., Rahimi M., Genetic algorithm modeling of a shell-and-coiled-tube heat exchanger, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
135-Beigzadeh R., Rahimi M., Experimental study and adaptive neuro-fuzzy modeling of heat transfer in coiled tubes, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
136-Azimi N., Faryadi M., Parvizian F., Shabanian R., Rahimi M.,CFD modeling of flow pattern a high frequency continuous tubular sonoreactor, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
137-Beigzadeh R., Aghel B., Shabanian S.R., Rahimi M., Experimental and CFD study on thermal and fluid flow characteristics in helically coiled tubes, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
138-Najafi R., Rahimi M., Shabanian S.R., CFD Modeling study the possibility of increase capacity a gasoline storage tank, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
139-Rezaei H., SalarAbadi A., Najafi R., Rahimi M., CFD modeling of injection system for masking sulphur compounds in natural gas condensate, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
140-SalarAbadi A., Rezaei H., Rahimi M., Vanishing bad smell from gas condensate in Ilam natural gas Refinery, 14th Congress of Iranian chemical Engineers, 16-18 October 2012, Tehran, Iran.
 
2013…………..
141-Karami A., Rezaei E., Rahimi M. and Khani S., Modeling of Heat Transfer in an Air Cooler Equipped with Classic Twisted Tape Inserts Using Adaptive Neuro-Fuzzy Inference System, Chemical Engineering Communications, 200, 532–542, 2013.
142- Shabanian S.R., Medwell P.R , Rahimi M., Frassoldati A.,  Cuoci, A. Kinetic and fluid dynamic modeling of ethylene jet flames in diluted and heated oxidant stream combustion conditions, Applied Thermal Engineering, 52, 538-554, 2013.
143-Valeh-e-Sheyda P., Rahimi M., Karimi E., Asadi M., Application of two-phase flow for cooling of hybrid microchannel PV cells:A comparative study, Energy conversion and Management, 69, 122–130, 2013.
144-Amiri A.,Rahimi M., Shabanian S.R., Experimental study on using HiTAC technique for synthesis gas production, Chemical Engineering Communications, 200,907–918, 2013.
145-Rahimi M., Karimi E., Asadi M., Valeh-e-Sheyda P., Heat transfer augmentation in a hybrid microchannel solar cell, International communications in heat and mass transfer, 43, 131–137,2013.
146-Azimi, N., Parvizian F., Rahimi M., Using microparticles to enhance micromixing in a high frequency continuous flow sonoreactor, Chemical Engineering and Processing journal, 70, 250– 258, 2013.
147-Beigzadeh R., Rahimi, M., Parvizi M., Effects of geometrical parameters on heat transfer rate augmentation in helically coiled tubes, Heat Mass Transfer journal, 49,1307–1318, 2013.
148-Fazlali, A., Beigzadeh R., Rahimi, M., Application of artificial neural network for vapor liquid equilibrium calculation of ternary system including ionic liquid: Water, Ethanol and 1-Butyl-3-methylimidazolium Acetate, Korean Journal of Chemical Engineering, 30, 1681-1686, 2013.


149-Amiri A.,Rahimi M., Shabanian S.R., Experimental study on using HiTAC technique for synthesis gas production, Chemical  Engineering Communications, 200,907–918, 2013.


150-Azari, A. Kalbasi, M., Derakhshandeh, M., Rahimi M., An Experimental Study on Nanofluids Convective Heat Transfer Through a Straight Tube under Constant Heat Flux, Chinese Journal of Chemical Engineering, 21, 1082-1088, 2013.


2014………………

151-Azimi,N.,  Rahimi M.,  Parvizian F., Alsairafi A.A., Computational Fluid Dynamics modeling of micromixing performance in presence of microparticles in a tubular sonoreactor, Computer and Chemical Engineering, 60,  403– 412 , 2014.

152-Beigzadeh R., Rahimi, M., Parvizi M., Eiamsa-ard S., Application of ANN and GA for the prediction and optimization of thermal and flow characteristics in a rectangular channel fitted with twisted tape vortex generators, Numerical Heat Transfer-Part A, 65, 186–199, 2014.

153-Parvizian F., Rahimi M.,  Azimi,N., Alsairafi A.A., CFD modeling of micromixing and velocity distribution in a 1.7 MHz tubular sonoreactor, Chemical Engineering and technology, 37,1-11, 2014.

154-Zinadini S., Zinatizadeh A., Rahimi M., Vatanpour V., Zangeneh H., Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates, Journal of Membrane Science, 453, 292–301,2014.

155-Faryadi M., Rahimi M., Safari S., Moradi N.,  Effect of high frequency ultrasound on micromixing efficiencyin microchannels, Chemical Engineering and Processing, 77,  13– 21, 2014.

156-Rahimi M., Aghel B., Alitabar M., Sepahvand A., Ghasempour H.R., Optimization of biodiesel production from soybean oil in a microreactor, Energy Conversion and Management, 79, 599–605, 2014.

157-Valeh-e-Sheyda P., Rahimi M., Parsamoghadam A., Masahi M. M., Using a wind-driven ventilator to enhance a photovoltaic cell power generation, Energy and Building, 73,115-119, 2014.

158-Aghel B, Rahimi M., Alitabar M., Sepahvand A., Ghasempour H.R.,Using a wire coil insert for biodiesel production enhancement in a microreactor, Energy Conversion and Management,84, 541–549, 2014.

159-Rahimi M., Safari S., Faryadi M., Moradi N.,  Experimental investigation on proper use of dual high-low frequency ultrasound waves- Advantage and disadvantage, Chemical Engineering and Processing, 78, 17–26, 2014.

160-Rahimi M., Valeh-e-Sheyda P., Parsamoghadam A., Masahi M. M., Alsairafi A.A.,Design of a self-adjusted jet impingement system for cooling of photovoltaic cells, Energy Conversion and Management, 83, 48–57, 2014.

161-Karami, N.,  Rahimi M., Heat transfer enhancement in a hybrid microchannel-photovoltaic cell using Boehmite nanofluid, International communications in heat and mass transfer, 55,  45–52, 2014.

162-Azari, A. Kalbasi, M., Rahimi M., CFD and experimental investigation on the heat transfer characteristic of alumina nanofluids under laminar flow regime.  Brazilian Journal of Chemical Engineering. 31,469 - 481, 2014.

163-Karami, N.,  Rahimi M., Heat transfer enhancement in a PV cell using Boehmite nanofluidو Energy Conversion and Management, 86, 275–285,2014.

164-Dehbani M.,  Rahimi M., Abolhasani M., Maghsoodi A., Ghaderi Afshar P., Dodmantipi A.R.,  Alsairafi A.A., CFD modeling of convection heat transfer using 1.7 MHz and 24 kHz ultrasonic waves- A comparative study, Heat Mass Transfer,50,1319–1333 , 2014.

165-Rahimi M., Aghel B., Sadeghi M., Ahmadi M., Using Y-shaped microreactor for continuous decolorization of an Azo dye, Desalination and water treatment, 52, 5513–5519, 2014.

166-Rahimi M., Aghel B., Hatamifar, B. Akbari, M., Alsairafi A.A., CFD modeling of mixing intensification assisted with ultrasound wave in a T-type microreactor, Chemical Engineering and Processing, 86, 36-46, 2014.

167- S.Zinadini, Rahimi M., Zinatizadeh, A.A,  Novel high flux antifouling nanofiltration membranes for dye removal containing carboxymethyl chitosan coated Fe3O4 nanoparticles, Desalination, 349,45–154 2014.

168-Rahimi M. , Valeh-e-Sheyda P., Parsamoghadam M.A., Azimi N., Adibi H.,  LASP and Villermaux/Dushman protocols for mixing performance in microchannels: Effect of geometry on micromixing characterization and size reduction, Chemical Engineering and Processing, 85, 178–186, 2014.


2015………………
169-Zinadini S., Rahimi M., Zinatizadeh, A.A, Shaykhi Mehrabadi,Z. High frequency ultrasound-induced sequence batch reactor as a practical solution for high rate wastewater treatment, J. Environmental Chemical Engineering, 3 , 217-226, 2015.
170-Abolhasani M., Karami, A., Rahimi M., Numerical modeling and optimization of enhancement of cooling rate in concentric tubes under ultrasound field, Numerical heat transfer- A, 67, 1282–1309, 2015.
171-Rahimi M. , Valeh-e-Sheyda P., Parsamoghadam M.A., Azimi N., Adibi H., Geometrical Effect of micro-channels on size reduction of curcumin Nano-suspension Via Liquid Anti-solvent Precipitation Process,  Journal of the Taiwan Institute of Chemical Engineers, 46, 65-73, 2015.
172-Rahimi M. , Akbari M., Parsamoghadam, M.A, Alsairafi, A.A.,CFD study on effect of channel confluence angle on fluid flow pattern in asymmetrical shaped microchannels, Computer and Chemical engineering,73, 172-182, 2015.
173-Rahimi M., Abolhasani M., Azimi, N., High frequency ultrasound penetration through concentric tubes: illustrating cooling effects and cavitation intensity, Heat Mass Transfer, 5, 587-599, 2015.
174-Faryadi M., Rahimi M., Moradi N., Safari S., Ammonia removal using 1.7 MHz high frequency ultrasound in batch and novel dam-weir falling systems, Desalination and water treatment, 54, 3412-3421, 2015. 
175-Ebrahimi, M., Rahimi M., Rahimi A., An experimental study on using natural vaporization for cooling of a photovoltaic solar cell , International Communication in Heat and Mass Transfer, 65, 22-30, 2015.
176-Rahimi M., Asadi M., Karami N., Karimi, E., A comparative study on using single and multi header microchannels in a hybrid PV cell cooling, Energy Conversion and Management,101,1-8, 2015.
177-Nalini N., Rahimi M., Heydari, R.,Oleuropein extraction using microfluidic system, Chemical Engineering and Processing, 92. 1-6, 2015.
178-Valeh-e-Sheyda P., Rahimi M., Adibi H., Razmjou Z., Ghasempour H.,   An insight on reducing the particle size of poorly-water soluble curcumin via LASP in microchannels, Chemical Engineering and Processing, 91. 78-88, 2015.
179-Rahimi M., Hajialyani M., Beigzadeh R., Alsairafi, A.A.,  Application of Artificial Neural Network and Genetic Algorithm Approaches for Prediction of Flow Characteristic in Serpentine Microchannels, Chemical Engineering Research and Design, 9 8 147–156 , 2 0 1 5.
180-Zinadini S., Vatanpourb V., Zinatizadeh A.A, Rahimi M, Rahimi Z., Kian M., Preparation and characterization of antifouling grapheneoxide/polyethersulfone ultrafiltration membrane: Application in MBR for dairy wastewater treatment, Journal of Water Process Engineering , 7 280–294, 2015
181-Basiri, M. , Rahimi , M., Mohammadi, F., Investigation of Liquid–liquid two-phase flow pattern in microreactors for biodiesel production, IJCHE, 12, 32-40, 2015.
182-Rahimi M., Banybayat M., Tagheie Y. , Valeh-e-Sheyd P., An insight on advantage of hybrid sun–wind-tracking over sun-trackingPV system, Energy Conversion and Management, 105, 294–302, 2015.
183-Mohammadi Doust A., Rahimi M., Feyzi M., Effects of solvent addition and ultrasound waves on viscosity reduction of residue fuel oil, Chemical Engineering and Processing, 95, 353–361, 2015.
184-Mohammadi Doust A., Rahimi M., Rostami A., Modeling of BOD and COD removal in an aeration process treating refinery waste water by artificial neural network , Petroleum and Coal, 57, 500-508, 2015.
185-Azimi N., Rahimi M.,  Abdollahi,N., Using magnetically excited nanoparticles for liquid-liquid two-phase mass transfer enhancement in a Y-type micromixer, Chemical Engineering and Processing, 97, 12–22, 2015.

2016………………
186-Dadari S., Rahimi M., Zinadini, S., Crude oil desalter effluent treatment using high flux synthetic nanocomposite NF membrane- optimization by response surface methodology, Desalination, 377, 34-46, 2016.
187-Mohammadi Doust A., Rahimi M., Feyzi M., An Optimization Study by Response Surface Methodology (RSM) on Viscosity Reduction of Residue Fuel Oil Exposed Ultrasonic Waves and Solvent Injection, IJChE,13, 3-19, 2016.
188- Jafari M., Rahimi M., Hosseini Kakavandi F., Liquid–liquid extraction in twisted micromixers , Chemical Engineering and Processing, 101,33–40, 2016.
189-Faryadi M., Rahimi M., Akbari M., Process modeling and optimization of Rhodamine B dye ozonation in a novel microreactor equipped with high frequency ultrasound wave, Korean Journal of Chemical Engineering, 33, 922-933  2016.
190-Basiri, M. , Rahimi , M., Babaei Mohammadi, H., Ultrasound-Assisted Biodiesel Production in microreactors, IJChE, 13, 22-32, 2016.
191-Beigzadeh,R., Hajialyani,M., Rahimi , M., Heat transfer and fluid flow modeling in serpentine microtubes using adaptive neuro-fuzzy approach, Korean Journal of Chemical Engineering, 33, 1534-1550, 2016.
192-Parvizian F., Rahimi M., Hosseni, S.M., Prediction of the Characteristics of a New Sonochemical Reactor Using an Expert Model, Chemical Engineering Communications, 203,683–691, 2016
193-Mohammadi Doust A., Rahimi M., Feyzi M.,Prediction and Optimization of the Effects of Combining Ultrasonic Waves and Solvent on the Viscosity of Residue Fuel Oil by ANN and ANFIS, J. of physical Chemistry Research, 4, 333-353,2016.
194- Rahimi M., Zinadini S., Zinatizadeh, A.A, Vatanpour,V., Rajabi, L., Rahimi, Z., Hydrophilic goethite nanoparticle as a novel antifouling agent in fabrication of nanocomposite polyethersulfone membrane, J. of Applied Polymer, In Press, 2016.
195-Moradi N., Rahimi M., Faryadi M., Safari S.,Removal of ammonia by high frequency ultrasound wave (1.7 MHz) combined with TiO2 photocatalyst under UV radiation, Desalination and water treatment, In Press, 2016.
196- Rahimi , M., Beigzadeh,R., Parvizi, M., Eiamsa-ard, S. GMDH-type neural network modeling and genetic algorithm-based multi-objective optimization of thermal and friction characteristics in heat exchanger tubes with wire-rod bundles, Heat Mass Transfer, In Press, 2016.
197-Mohammadi, F., Rahimi , M., Basiri, M. , Parsamoghadam M.A., Masahi, M. M., Transesterification of soybean oil in four-way micromixers for biodiesel production using a cosolvent, Journal of the Taiwan Institute of Chemical Engineers, In Press, 2016.
198- Rahimi , M., Beigzadeh,R., Jafari M., Alsairafi, A.A., Computational fluid dynamic assists artificial neural network and genetic algorithm approaches for thermal and flow modeling of air forced convection on interrupted plate fins, Numerical heat transfer, In Press, 2016

Last Modified: 1 April 2016

.
خانه | بازگشت | حريم خصوصي كاربران |

Powered By Sigma ITID.
Guest (RaziGuest)